Oxi Clean Versatile Stain Remover

Hard Surfaces

1. Mix: Fill to line 4 per gallon of water. NOTE: For some surfaces, like grout, a more concentrated solution/paste may be used.

2. Apply using a cloth, sponge, brush, or by pouring solution directly onto surface.

3. Let stand 5-30 min. Scrub as needed. For large surfaces, work with small areas, so solution does not dry on the surface.

4. Rinse well with cool water. Soft Surface Stains.

Use only on water-washable upholstery and rugs.

Mix: Fill to line 1 per 16 ounces of water. Remove excess stains before treating.

For
Carpet: Apply only enough solution to saturate stain. Allow solution to
stand 1-5 minutes. Do not allow solution to dry on fabrics. Blot with
white towel. Repeat until stain is not visible. Rinse carpet with clean
water and blot until dry.

For
upholstery: Do not apply solution directly on stain. Apply with clean
white towel and use towel to blot out stain. Repeat until stain is not
visible. Then, dampen a clean white towel with water and blot area to
rinse. Cleaner, Whiter, Brighter. Add to every load. Safe for all
colors.

Top Loader: Fill washer with water. Add OxiClean and detergent BEFORE adding laundry.

Fill to Line 1 for regular loads, or more for large heavily soiled loads.

HE Waser**: Add OxiClean to washer BEFORE adding laundry.

**Do not mix OxiClean with detergent in the dispenser. Read your HE owner’s manual instructions. Read before use. Directions:

1) Always test OxiClean on an inconspicuous area first. Rinse, allow to dry. Safe on colorfast fabrics only.

2) Follow manufacturer’s instructions for water temperature and for cleaning garment or item.

3)
Do not use on wool, wool blends, silk, silk blends, leather, or on
fabrics labeled dry clean only. Not for use on jewelry, latex paints,
woven baskets, unpainted wicker, jute, teak, or finished woods. Metals
must not be soaked and must be rinsed immediately and thoroughly. Not
for use on rust, dried paint, or bleach damage. Safe for septic tanks.

4)
OxiClean works best in warm to hot water. If washing with cold water,
first dissolve OxiClean in 16 oz. of warm to hot water. Add to cold
water.

5)
Treat stains while fresh. Always rinse well with cool water. Do not
place fabric that has not been thoroughly rinsed into dryer.

6)
Some stains require repeated or longer treatments. Adding more OxiClean
powder than directed increases the risk of color loss. Tough laundry
stains. Mix until completely dissolved. Use warmest water possible Use
solution within 6 hours.

1. MIX: Fill scoop to line 2 to 4 per gallon of water. Submerge stained items in solution after dissolved.

Line 2 for typical stains or Line 4 for extra tough stains.

2. SOAK 1-6 hours. Depending on severity of stain, some stains may require more time to soak. For best results soak for 6 hours.

3. WASH as normal with detergent and OxiClean.

Warnings