Resolve Pet Expert Carpet Foam Carpet Foam

How
to use: Shake well & spray. Work in the foam using a brush or damp,
colorfast mop. Leave for 2 hours, or until dry, then vacuum. Before
cleaning: Vacuum carpet thoroughly to remove loose dirt. Test a small,
hidden area for colorfastness and examine when dry. If color is affected
do not use. For upholstery, look for manufacturer’s cleanability code
tag. Use on fabrics coded “WS” or “W”. If coded “X” or “S” do not use.
Not recommended for use on velvet, silk, vinyl, or leather. Do not use
Resolve® Easy Clean Pro on any surface other than carpets. Do not spray
directly on pets. Use only in well ventilated areas. Keep children and
pets off carpet till dry. Directions: Large area carpet cleaning: 1.
Shake can well. Hold can upside down about 2 feet above carpet. Spray
foam evenly over a 3 foot square area. 2. Work the foam into carpet in
two directions using a damp, colorfast mop. 3. Repeat steps 1 & 2
until the entire area is cleaned. 4. When dry, vacuum thoroughly to
remove dried foam and loosened dirt. For use in Resolve® Easy Clean Pro
Carpet Brush: 1. Remove spray cap from Resolve® High Traffic Foam 22 oz
can. Shake the can vigorously before each use. If the can is already in
the gadget, remove and shake again. 2. Insert can into the gadget and
rotate clockwise until it gently clicks into the locked position. 3. To
remove the can, rotate counter-clockwise into the unlocked position and
gently pull upwards. 4. Pull trigger to dispense foam, then brush the
foam into the carpet. When dry, vacuum thoroughly to remove dried foam
and loosened dirt. 5. Replace spray cap to can for standard use.
Upholstery cleaning: 1. Blot wet soils with a clean absorbent cloth. 2.
Shake can well and generously apply directly to stain from a distance of
4-6 inches. Allow foam to absorb into stain for 3 minutes. 3. Gently
blot area with a clean, damp, colorfast sponge or cloth. Rub gently if
required. Do not overwet fabrics. Hint: To avoid rings, clean entire
section where soil occurs. 4. Rinse sponge or cloth and repeat as
necessary. Allow fabric to dry thoroughly before use. 5. Only use spray
cap to dispense foam for upholstery cleaning. To ensure complete
dispensing during life of product, tilt can downwards at approximately
60° while spraying. Contents will clean a carpeted area of 168 square
feet (12′ x 14′). If accidently sprayed on wood furniture, just wipe
off. For best results: Use vacuum cleaner with a fresh, empty bag.

Warnings